Home»Products»High Temperature Cobra Extruder - up to 400 degrees C
High Temperature Cobra Extruder - up to 400 degrees C
Micron E.M.E Cobra High Temperature extruder
Printing up to 400 degrees C
Excellent performance with flexible materials
Light weight and compact design
Extremely fast and reliable printing with flexible materials such as NinjaFlex and PVA
Small light weight package
100% All-Metal enables reliable and continuous printing up to 400 deg c. Unlike other extruders (No Teflon tubing or plastic parts inside the hot-end).
Like all Micron E.M.E extruders & hot-ends, the Cobra extruder line comes with the patent pending easily replaceable nozzle and guide.
It takes less than a minute to switch to a different nozzle size or to a different material, without changing the calibration of the Z height.
Reliable design: Cobra extruders use a small but powerful 1:13 planetary geared motor equipped with a 304 stainless steel hobbed gear. Including a special tooth profile which provides strong filament gripping.
Continuous idler bearing with preload adjustment, using 2 set screws
Easy opening service door that maintains idler bearing preload while opening and closing.
Short and Smooth filament feeding design that prevents the filament from jamming after passing the hobbed gear.
Test proven with PLA, ABS,Peek, poly-carbonate, nylon, Carbon PLA, HPIS, Ninjaflex and PVA.
High flow rate package available, sold separately.
Step motor rated current/Phase: 0.67 Amp. Rated voltage/Phases: 6.2 VDC
Fans: 30x30x10, 12V or 24V (specify)
Heaters: 12V or 24V (specify), 100 watt
.Thermocouple type K Temperature Sensor
1:13 Motor: Nema 11 Planetary Gearbox step Motors
Materials: black anodize Aluminum 6061-T651 housing, Stainless Steel 304 hobbed gear and Brass nozzle
Filament size: 1.75mm
Available nozzles diameter: 0.35mm and 0.5mm.
Total weight: 360 gram
What you get:
Assembled and tested Cobra single High Temperature "all metal" extruder and hot end including:
1 x Heater 1 x Type-K Thermocouple 1 x Fan 1 x "DFGNM" 0.35mm installed. 1 x "DFGNM" 0.5mm replacement. 3 x M3 x 0.5 x 8 flat head mounting screws.
Micron E.M.E provides solid models of the extruder assembly and the blank mounting plate. The blank mounting plate for Micron3DP "all metal" single extruder enables mounting the extruder parallel or ortogonal to the X axis.
Micron is committed to improve printing quality and support future materials require relatively high temperature, thus all our extruders integrated with patent pending "all metal" hot end. About the founders:Arik BrachaArik is the founder and gene...